Any views expressed within media held on this service are those of the contributors, should not be taken as approved or endorsed by the University, and do not necessarily reflect the views of the University in respect of any particular issue.
insect robots

Insect Robotics Group

Insect Robotics Group

Building robots to understand insect behaviour

AntBot: Make Your Own AntBot

antbot_side_view

 

Above we can see AntBot ‘in the flesh. Ignoring the lego framework that supports the camera, to assemble your own AntBot you need the following*:

component

 

*You will also need some standard issue male-female copper wires to connect the boards as well as a Serial-USB cable to connect the Arduino to the smartphone.

The prices quoted are taken from Proto-Pic at the time of writing and as such it may be prudent to shop around in case these have changed. While a Nexus 5 is listed, the framework can theoretically be deployed on any Android smartphone with a sufficient level of processing power.

 

To connect the chassis to the motor driver board, simply connect as directed in the following. Each ‘channel’ corresponds to a wheel, i.e. Channel 1 -> Wheel 1 etc.

components_chassis

To connect the Ardunio to the motor driver board, connect like so:

components_arduino

 

The colours correspond to the channels in the picture above.

 

First step done, now it’s time to calibrate the chassis!

css.php

Report this page

To report inappropriate content on this page, please use the form below. Upon receiving your report, we will be in touch as per the Take Down Policy of the service.

Please note that personal data collected through this form is used and stored for the purposes of processing this report and communication with you.

If you are unable to report a concern about content via this form please contact the Service Owner.

Please enter an email address you wish to be contacted on. Please describe the unacceptable content in sufficient detail to allow us to locate it, and why you consider it to be unacceptable.
By submitting this report, you accept that it is accurate and that fraudulent or nuisance complaints may result in action by the University.

  Cancel